Tag Archives: Rolling Mill

Tool Time Tuesday – Texture Your Metal with Cupcake Wrappers?!?!?! *Giveaway*

Seriously! You can use cupcake wrappers to texture your metal if you know what you are doing. There have been so many advances in technology that leads to new objects that can be used in a number of ways. One such product is the decorative cupcake wrapper. They are laser cut papers with a consistency of a mid weight card stock. And that means they are perfect for texturing metal in a rolling mill.

Cupcakes and Texture

Watch this super short video to see how I use these decorative wrappers to impart a beautiful texture on my metal.

Video link: https://youtu.be/C6310DiJVv0

Where do you find these wrappers? Well, I found mine on Amazon as well as in the craft store. They are all the rage right now, so they aren’t too difficult. But I did go through a TON of listings and picked out about 16 of them and found the ones with the best prices.

I like using water color paper and this is the one I use:

140 pound Water Color Paper:
http://amzn.to/2eaUdTj

Here are the ones I like best…. and most are on their way to me right now as I type this. 😀

Affiliate links for other cupcake designs on Amazon:
multi_blueCombo pack – 6 designs
http://amzn.to/2eaKuML

Twist Flower Lace:
http://amzn.to/2fenehW

Ghost Cupcake Wrappers:
http://amzn.to/2fBtAMz

Bats:
http://amzn.to/2eaGGLD

Spider Web:
http://amzn.to/2fepRQH

White Snowflake:
http://amzn.to/2fBzxsZ

Snow Flake 2:
http://amzn.to/2ekg6mB

Eyelet:
http://amzn.to/2fBA1PD

Vine Lace:
http://amzn.to/2ekbnB8

Art Nouveau:
http://amzn.to/2fBDL3M

Vine Lace:
http://amzn.to/2fBDygU

Fine Vine Lace:
http://amzn.to/2feyo66

Heart Filigree:
http://amzn.to/2eaLX5V

Butterfly
http://amzn.to/2eaSEEM

White Flower:
http://amzn.to/2eYuFdH

Filigree flower lace
http://amzn.to/2feyX04

GIVEAWAY

I am giving away 20 of these wrappers (4 wrappers to 5 different winners.) Be sure to watch the video, Subscribe to my channel and leave your comment on the YouTube video to be entered. I will be doing a new video on Friday to announce the winners and answer some of the questions asked. I would like to do the Friday videos regularly. So be sure to pose your questions. Thanks for all your support and good luck on winning.

Tool Time Tuesday – Intro to torches AND Use your scrap to create and roll out an ingot.

Yesterday I got you caught up to what I had been doing for the past couple of months. Of course there was a lot that I left out as the post was getting pretty long. So with all of that said however, I am going to start from here and do my best to keep up. Wish me luck.

I have two videos to share with you today. The first video was published last week. But there were some things I wanted to share with it. As you may know, I have been making videos for about 5 years now. I know most of you think that I receive all the tools I review for free. However, that can not be further from the truth. While I do occasionally receive a tool for free, I actually purchase the majority of them. Sometimes I am able to get them at a discount, but that isn’t always the case either. Why am I telling you this? Well, it is time I figure out a way to help cover the cost of the tools I review and use in the studio and share with you. I have signed up for the affiliate program through Amazon. This will allow me to share with you some of the tools I use in various projects and such and make a small (very small) commission if you should follow the link and purchase it. I will only be showing items that I would use myself and think  you may find useful. So if you find something you may like, please consider following my link to purchase. This will help me keep the blog and video posts coming. You will also see ads on my videos. I do not have any control over the content that is shown in those ads. I do get a small fee for the time the ad is displayed. I cannot tell you to click on them, but again, consider watching them or letting them play out. My next purchase goal is to get some good lighting for shooting the videos. Just this past week, I finally upgraded my camera and I am hoping it will have some good effects down the line. Thank you all for your support. I appreciate it.

Torches Torches Torches

So many torches, how do you choose which one is right for you?

So many torches, how do you choose which one is right for you?

With all of that said, Let’s get on to the videos. The first video is one that I get a lot of requests. People are wondering which torch is best to have in their home/studio/apartment, etc. So I take you though the six torches I routinely use in my home studio. First, you should always check with your insurance to make certain you will be covered in case of an accident. Second, always make certain you have some sort of ventilation system set up. I use a bench top fume extractor and it has worked great for me.

Some of the torches I use and like can be purchased through me. Others can be found on Amazon and other tool supply locations.

The Blazer Butane torch was the very first one I ever used. I am still using my original torch and it is my go to for small items such as when I am soldering bezels together and such.

This is the Acetylene/Air torch I use. I also use the #4 and #6 Tips.

The #4 tip is the one that is on my torch about 98% of the time.

I use the #6 Tip for annealing larger pieces and melting metal for casting.

Now that you know about some of the available torches, watch how I use them to melt down my scrap silver to create an ingot using an ingot and wire mold. Once I have an ingot, I forge it down and then roll it through a rolling mill to create a sheet in any thickness desired.